THIS IS A LEGAL AGREEMENT BETWEEN CUSTOMER AND POWER DESIGNER PRO. CUSTOMER AND POWER DESIGNER PRO MAY EACH BE REFERRED TO AS A “PARTY” AND COLLECTIVELY AS THE “PARTIES.” BY ACCESSING AND/OR USING THE SERVICES, CUSTOMER IS AGREEING, ON BEHALF OF AN INDIVIDUAL AND/OR A LEGAL ENTITY, TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
As used in the Agreement, the following defined terms shall apply:
1.1. Affiliate means, with respect to a Party, any entity that directly or indirectly controls, is controlled by, or is under common control with such Party, where “control” means the power, directly or indirectly, to direct, or to cause the direction of, the management and policies of an entity, through majority ownership of voting securities or equity interests.
1.2. Agreement means these Terms of Service and any other documents incorporated herein by reference.
1.3. Customer means the legal entity or individual that has ordered any Services from POWER DESIGNER PRO.
1.4. Customer Account means an account for Customer that is required to access and use the Services.
1.5. Customer Data means all data or information submitted by or on behalf of Customer to the Services, including POWER DESIGNER PRO AI Output, but does not include Aggregated Anonymous Data.
1.6. Fees means all POWER DESIGNER PRO fees and charges applicable to the Services.
1.7. Open-Source Software means third-party software distributed by POWER DESIGNER PRO under an open-source licensing model (e.g., the GNU General Public License, BSD or a license similar to those approved by the Open Source Initiative).
1.8. Order means any initial or subsequent ordering document, auto-renewal (if applicable and Customer has not provided timely notice of non-renewal), and/or online request by Customer for access to the Services submitted to POWER DESIGNER PRO, a POWER DESIGNER PRO authorized reseller, and/or through POWER DESIGNER PRO product websites.
1.9. PHI means personal health information covered by US HIPAA regulations. PHI may be uploaded as Customer Data only into those portions of the Services designated by POWER DESIGNER PRO as suitable for PHI.
1.10. Services means the generally available POWER DESIGNER PRO Software-as-a-Service (“SaaS”) offerings inclusive of any services delivered by POWER DESIGNER PRO through any unified, hosted POWER DESIGNER PRO service delivery platform, including any on-premises components (e.g., client software, tools), and Updates, all as further described in the Services Descriptions, as well as technical support services. POWER DESIGNER PRO may update the Services with Updates at any time in its sole discretion. Services are of an electronic nature delivered remotely via a technology infrastructure and with minimal or no human intervention.
1.11. Services Descriptions means the overview of and other terms applicable to the Services, as amended from time to time, as found in the Services documentation.
1.12. Subscription means Customer’s paid subscription to the Services pursuant to the applicable Order or Order Form.
1.13. Subscription Term means the then-current initial term or renewal term of the applicable Subscription during which Customer’s Users are authorized to use or access the Services pursuant to the terms set forth in this Agreement, unless earlier terminated as set forth in Section 3 below.
1.14. Taxes means all applicable taxes on Services (including but not limited to withholding tax, sales tax, services tax, value-added tax (VAT), goods and services tax (GST), and tariffs and/or duties) imposed by any government entity or collecting agency based on the Services.
1.15. Updates means any corrections, bug fixes, features or functions added to or removed from the Services but shall not include any new Service(s) not generally included with the Services purchased by Customer.
1.16. User means an individual that is authorized by Customer to access the Services through Customer’s assignment of a single user ID. Customer may purchase a Subscription to the Services for each Regular User.
1.17. POWER DESIGNER PRO means Bremen Engineering, Inc., a Saskatchewan Corporation.
1.18. POWER DESIGNER PRO AI means any feature(s) or functionality made available by POWER DESIGNER PRO that utilize artificial intelligence trained by machine learning using POWER DESIGNER PRO and/or third-party data models, which may be labeled as POWER DESIGNER PRO AI.
1.19. POWER DESIGNER PRO AI Output means output generated by POWER DESIGNER PRO AI and presented back to the Customer as a result of using the Services based on Customer Data provided as input to POWER DESIGNER PRO AI.
1.20. POWER DESIGNER PRO Marks means any name, logo, or mark belonging to POWER DESIGNER PRO or its Affiliates.
1.21. POWER DESIGNER PRO Materials means any material(s) that POWER DESIGNER PRO provides to Customer as part of, or in the course of providing, the Services or the consulting services, provided that Customer Data presented back to the Customer as a result of using the Services (which shall remain Customer Data) and POWER DESIGNER PRO AI Output are not POWER DESIGNER PRO Materials.
2.1. Right to Use Services for Business. Subject to these terms, POWER DESIGNER PRO, with the assistance of POWER DESIGNER PRO third-party service providers including its subcontractors and Affiliates, will provide Services set forth in any Order Form or Order that POWER DESIGNER PRO has accepted in accordance with this Agreement. Customer acknowledges that Services are not intended for use by consumers and are only for business and professional purposes as expressly granted in this Agreement. POWER DESIGNER PRO hereby grants Customer a limited, personal, non-exclusive, non-sublicensable, non-transferable worldwide license to use the Services up to the number of Users purchased for the applicable Subscription or as otherwise authorized to use or access the Services pursuant to the terms set forth in this Agreement. Updates to the Services are managed by POWER DESIGNER PRO and included in the Fees. Customer shall use the then-current version of the Services, including any Updates, as made available by POWER DESIGNER PRO. To the extent that Customer’s Affiliates use the Services, Customer warrants that it has the authority to bind those Affiliates and that Customer will be liable to POWER DESIGNER PRO in the event any Customer Affiliate fails to comply with this Agreement. Customer may purchase POWER DESIGNER PRO consulting services in support of its Subscription. With respect to POWER DESIGNER PRO consulting services, all intellectual property rights in all deliverables, pre-existing works and derivative works of such pre-existing works, as well as developments made, conceived, created, discovered, invented, or reduced to practice in the performance of the consulting services are and shall remain the sole and absolute property of POWER DESIGNER PRO, subject to a worldwide, non-exclusive license to Customer for internal use during the Subscription Term. At its sole discretion, POWER DESIGNER PRO may modify or discontinue any part of the Services (including without limitation, the availability of any feature) at any time.
2.2. Limitations on Use. Except to the extent permitted by applicable law, Customer and its Users shall not (i) modify, copy, display, republish, distribute, prepare derivative works of, reverse engineer, reverse assemble, disassemble, decompile or attempt to decipher any code relating to the Services and/or POWER DESIGNER PRO technology; (ii) modify, copy or create derivative works of any POWER DESIGNER PRO Materials; (iii) knowingly or negligently access or use the Services in a manner that abuses or disrupts the POWER DESIGNER PRO networks, security systems, customer accounts, or Services of POWER DESIGNER PRO or any third party, or attempt to gain unauthorized access to any of the above through unauthorized means; (iv) transmit through or post on the Services any material that is deemed abusive, harassing, obscene, slanderous, fraudulent, libelous or otherwise unlawful or tortious, including material harmful to children or violative of third-party privacy rights; (v) market, offer to sell, and/or resell the Services without POWER DESIGNER PRO’s prior written authorization (but the Services may be used by Customer in support of Customer’s proprietary service offering(s)); (vi) if Customer is a POWER DESIGNER PRO competitor for the relevant Services, use the Services directly or indirectly for competitive benchmarking or other competitive analysis; (vii) allow User licenses to be shared or used by more than one individual (except that User licenses may be reassigned to new Users replacing individuals who no longer use or access the Services through a Customer Account for any purpose; (viii) probe, scan or test the vulnerability of any system or network or breach or circumvent any security or authentication measure; (ix) access or search the Services by any means other than POWER DESIGNER PRO’s publicly supported interfaces (e.g., “scraping”); (x) impersonate another person or entity, or misrepresent an affiliation with a person or entity (e.g., “spoofing” or “phishing”); (xi) send unsolicited communications, promotions, advertisements or spam by using or in connection with the Services; (xii) upload any PHI to portions of the Services not designated by POWER DESIGNER PRO as suitable for PHI; (xiii) provide Customer Data or attempt to generate POWER DESIGNER PRO AI Output through POWER DESIGNER PRO AI that consists of any sensitive or regulated information, including PHI, health, genetic, biometric record or data in general, government-issued identification numbers of any kind, or personal financial or bank account information; (xv) use POWER DESIGNER PRO AI to develop foundation models or other large-scale models that compete with POWER DESIGNER PRO or POWER DESIGNER PRO AI; (xvi) mislead any person that POWER DESIGNER PRO AI Output was solely human-generated; (xvii) use POWER DESIGNER PRO AI to generate spam or content for dissemination in electoral campaigns; or (xviii) use POWER DESIGNER PRO AI in a manner that violates any technical documentation, usage guidelines, or parameters.
2.3. Inappropriate Content. Neither Customer nor its Users may post any Customer Data on the Services or otherwise make use of the Services in a manner that: (i) violates any applicable law (including export control laws and regulations), POWER DESIGNER PRO’s or any third party’s intellectual property rights, or anyone’s right of privacy or publicity; (ii) is deceptive, fraudulent, illegal, obscene, defamatory, disparaging, libelous, threatening, or pornographic (including child pornography, which, upon becoming aware of, POWER DESIGNER PRO will remove and report to law enforcement, including the National Center for Missing and Exploited Children); (iii) constitutes hate speech, harassment, or stalking; (iv) criticizes, berates or attacks others based on their race, ethnicity, national origin, religion, sex, gender, sexual orientation, disability or medical condition; (v) contains any personal information of minors under the age of 16; (vi) sends or stores information deemed “sensitive” or “special” under applicable law, including but not limited to financial account information, social security numbers, government-issued identification numbers, health information, biometric or genetic information, personal information collected from children under the age of 16, geo-location information of individuals or information about an individual’s racial or ethnic origin, trade union membership, sex life or sexual orientation, political opinions or religious or philosophical beliefs; (vii) contains viruses, bots, worms or similar harmful materials; or (viii) contains any information that Customer does not have a right to make available under law or any contractual or fiduciary duty, or could otherwise cause damage to POWER DESIGNER PRO or any third party.
2.4. Violations of Limitations on Use. If Customer becomes aware or receives notice from POWER DESIGNER PRO or a third party that any Customer Data or any User’s access to or use of Customer Data violates Section 2.2 or Section 2.3, Customer must take immediate action to remove the applicable part of the Customer Data and/or to suspend the User’s access to the Services, as applicable. POWER DESIGNER PRO may ask Customer to remediate such violation and, if Customer fails to comply with such request, POWER DESIGNER PRO may suspend or terminate the User’s access to the Services and/or suspend Customer’s access to the Services pursuant to Section 8.8.
2.5. Proprietary Rights. Except for the limited use rights expressly granted herein, Customer has no right, title, or interest in or to the Services, POWER DESIGNER PRO Materials, POWER DESIGNER PRO AI, or any other POWER DESIGNER PRO technology, including POWER DESIGNER PRO Marks or any intellectual property rights related thereto.
2.6. Open-Source Software. Notwithstanding anything to the contrary in this Agreement, Customer’s and its Users’ rights with respect to their use of Open-Source Software are governed exclusively by the applicable open-source license(s), not this Agreement.
3.1. Free Trials. New POWER DESIGNER PRO customers are eligible to participate in a free trial. The free trial starts when a Customer creates a Customer Account and ends upon the later of (i) fourteen (14) days from the free trial start date, or (ii) a date agreed upon by POWER DESIGNER PRO in its sole discretion. During the free trial, certain Services and features may not be available. At any time during the free trial, a Customer may convert its free trial Customer Account into a paid Subscription by clicking the “Subscription” button within the POWER DESIGNER PRO console. Customer’s continued use of the Services after upgrading to a paid Subscription is subject to its ongoing compliance with this Agreement, and any free trial terms and conditions shall no longer apply. Customer can view the specific details of its Services plan by referencing the "Account Management - Subscription" page, available after logging into the Services. Customer may not receive notice or confirmation from POWER DESIGNER PRO that the free trial has ended or that the paid Subscription has begun.
3.2. General Terms and Billing. POWER DESIGNER PRO will bill and Customer agrees to pay Fees at the beginning and upon renewal of its Subscription, plus any applicable Taxes, unless and until Customer timely cancels its Subscription or POWER DESIGNER PRO terminates it. The Subscription will automatically renew for successive Subscription Terms unless either Party provides written notice of its intent not to renew prior to the expiration of the then-current Subscription Term. POWER DESIGNER PRO may increase the Fees due under the applicable Order or Order Form for the applicable renewal term (if any) by providing notice to Customer of such increase at least sixty (60) days before the commencement of the upcoming renewal term, provided that the per-unit Fees shall be increased by no more than the greater of (i) the then-list price as publicly marketed on POWER DESIGNER PRO’s website, or (ii) five percent (5%) of the prior Subscription Term’s Fees. Customer must cancel its Subscription before the Subscription renews to avoid incurring the next Subscription Term’s Fees. Fees may include Services level changes as requested by Customer. POWER DESIGNER PRO will automatically bill Customer for each renewal period on the calendar day corresponding to the commencement of its Subscription. If Customer elects to upgrade its Services level or otherwise add any paid component or feature, POWER DESIGNER PRO will prorate the amount due based on the number of days remaining in Customer’s billing cycle; provided, however, that any such proration shall be based on Customer’s Services level or paid components or features in existence immediately prior to Customer’s election to upgrade or add paid components or features. If Customer downgrades its Services level, Customer may cause the loss of Customer Data or features for its Customer Account; Customer agrees POWER DESIGNER PRO shall not be liable for any such losses. Except to the extent required by applicable law (including, without limitation, Australian law), all purchases are final and POWER DESIGNER PRO DOES NOT PROVIDE REFUNDS OR CREDITS FOR ANY PARTIAL OR UNUSED SUBSCRIPTION PERIODS, OR WHERE CUSTOMER HAS ELECTED TO DOWNGRADE SERVICES LEVELS OR OTHERWISE REMOVED ANY PAID COMPONENT OR FEATURE, OR FOR ANY FEATURE OR COMPONENT THAT CUSTOMER HAS PAID FOR BUT NOT USED.
3.3. Fee Increase Grace Period. POWER DESIGNER PRO may, in its sole discretion, offer a grace period during which Customer’s Fees will not increase for a certain period of time. If Customer does not accept the increase or addition to the existing Fees, Customer may elect to terminate its Subscription during the then-current billing period and Customer shall not be liable for such Fee increase after the applicable billing period; however, any later renewal of the Subscription will be subject to the increased Fees. If Customer’s credit or debit card used to pay the Fees reaches its expiration date, Customer’s continued use of the Services constitutes its authorization for POWER DESIGNER PRO to continue billing Customer, and Customer remains responsible for any uncollected amounts.
3.4. Free Customer Accounts. Customer may cancel its Subscription at any time and cancellation will be effective immediately. Customer agrees that, after termination or expiration of its Subscription, its Customer Account will be converted to a free Customer Account (if available for the particular terminated or expired Subscription).
3.5. Taxes. In connection with the purchase and/or use of the Services, Customer may be subject to Taxes, by any authority which has jurisdiction to impose such Taxes. Customer agrees that Customer is solely responsible for its obligation and payment of any such Taxes, and Customer agrees, unless otherwise required by applicable law, to indemnify POWER DESIGNER PRO to the extent that POWER DESIGNER PRO incurs any obligations or other liabilities in connection with such Taxes. POWER DESIGNER PRO’s failure to charge appropriate Taxes due to incomplete or incorrect information provided by Customer will not relieve Customer of its obligations under this Section 3.5.
3.6. Payment Fees. If Customer makes any payment via credit card, foreign currency, or wire transfer, all associated credit card fees, currency exchange fees, and outgoing and incoming bank fees (including, without limitation, Customer’s bank fees and POWER DESIGNER PRO’s bank fees) (collectively with credit card fees and currency exchange fees, “Payment Fees”) shall be Customer’s responsibility and shall be recoverable by POWER DESIGNER PRO from Customer. Customer may include such Payment Fees at the time of the payment to POWER DESIGNER PRO. However, if such Payment Fees are not included by Customer at the time of payment to POWER DESIGNER PRO, then POWER DESIGNER PRO shall be entitled to full reimbursement of such Payment Fees from Customer within sixty (60) days of any applicable payment initiated by Customer.
POWER DESIGNER PRO may, with or without prior notice, immediately terminate the Customer’s Account, Subscription, Subscription Term, and/or access to the Services. Such termination may be made in POWER DESIGNER PRO's sole and absolute discretion, with or without cause. Customer agrees that POWER DESIGNER PRO shall not be liable to Customer or any third party for any termination of its Customer Account, Subscription, Subscription Term, and/or access to the Services.
5.1. Customer Data. Customer retains all rights to any and all of its Customer Data, subject to a non-exclusive, transferable, sublicensable, worldwide, royalty-free license to POWER DESIGNER PRO as necessary to provide the Services hereunder. Each Party shall apply reasonable technical, organizational, and administrative security measures, as appropriate relative to the Services, to keep Customer Data protected in accordance with industry standards, including those identified in Section 8.7 for POWER DESIGNER PRO. If POWER DESIGNER PRO reasonably believes a problem with the Services may be attributable to Customer Data or Customer’s use of the Services, Customer shall fully cooperate with POWER DESIGNER PRO to identify the source of and resolve the problem. Customer shall comply with all intellectual property laws and obligations related to the Customer Data, as well as all legal duties applicable to Customer by virtue of using the Services, including providing all required information and notices and obtaining all required consents. This Agreement states POWER DESIGNER PRO’s exclusive obligations with respect to care of Customer Data. POWER DESIGNER PRO will automatically delete any remaining Customer Data and Customer Account after such free account has been inactive for one-hundred-eighty (180) days. Customer must download Customer Data, if desired, prior to deletion by POWER DESIGNER PRO as stated herein.
When Customer uses POWER DESIGNER PRO AI, Write AI Output shall be Customer Data for purposes of this Agreement. Customer acknowledges that, due to the nature of machine learning and the technology powering POWER DESIGNER PRO AI features, Output may not be unique and POWER DESIGNER PRO AI may generate the same or similar output to POWER DESIGNER PRO or a third party. Customer will not provide Input or attempt to generate Output through POWER DESIGNER PRO AI that consists of any sensitive or regulated information, including (i) Protected Health Information as defined by US HIPAA laws or similar statutes, or health, genetic, biometric record, or data in general; (ii) government-issued identification numbers of any kind; or (iii) personal financial or bank account information. Notwithstanding anything to the contrary in this Agreement, Customer agrees that, as between Customer and POWER DESIGNER PRO, POWER DESIGNER PRO retains ownership of all legal rights, title, and interest in and to POWER DESIGNER PRO AI, including all intellectual property rights, and except for the license provided herein, no other rights or permissions to POWER DESIGNER PRO AI is granted.
5.2. Customer Account. Customer is solely responsible for (i) the configuration of its Customer Account; (ii) the operation, performance and security of Customer’s equipment, networks and other computing resources used to connect to the Services; (iii) ensuring all Users exit or log off from the Services at the end of each session in accordance with Customer’s session policy; (iv) maintaining the confidentiality of a Customer Account, User IDs, conference codes, passwords and/or personal identification numbers used in conjunction with the Services, including not sharing login information among Users; and (v) all uses of the Services that occur using Customer’s password or Account. Customer will notify POWER DESIGNER PRO immediately of any unauthorized use of its Customer Account or any other breach of security relating to Customer’s use of the Services. Customer will be liable for losses, damages, liability, expenses, and attorneys’ fees incurred by POWER DESIGNER PRO or a third party due to someone other than a User using a Customer Account. Ownership of a Customer Account is directly linked to the individual or entity that completes the registration process for such Customer Account. Customer acknowledges that POWER DESIGNER PRO will rely on the information provided by Customer to resolve issues arising with the Customer Account.
5.3. Customer Account Access/Instructions. The Customer Account owner and any authorized Users will have access to information in the Customer Account, subject to the account’s sharing settings. POWER DESIGNER PRO will not provide access to any other person or entity at any time, except with the Customer Account owner’s prior consent. Customer agrees that POWER DESIGNER PRO may rely on instructions given by the Customer Account owner either through the Account dashboard or via email from the address on file at POWER DESIGNER PRO for the Customer Account owner. Customer agrees not to request access to or information about an account that is not owned by the Customer. In the event of a dispute regarding Customer Account data, POWER DESIGNER PRO will only release information to persons other than the Customer Account owner pursuant to a court order or other notarized waiver and release as determined by POWER DESIGNER PRO. Customer is solely liable and responsible for understanding the settings, privileges, and controls for the Services and for controlling whom Customer permits to become a User and the settings and privileges for such User, including, without limitation, the right for a User to invite other Users (either paid or unpaid) to use Customer’s Services, the right to incur charges on the Customer Account, and the right to access, modify or share tasks or projects, etc. Customer is responsible for the activities of all of its Users, including orders they may place and how Users use the Customer Data, even if those Users are not from Customer’s organization or domain.
6.1. POWER DESIGNER PRO WARRANTS THAT THE SERVICES WILL MATERIALLY CONFORM TO THE SERVICES DESCRIPTIONS. POWER DESIGNER PRO’S ENTIRE LIABILITY AND CUSTOMER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY WILL BE, IN POWER DESIGNER PRO’S SOLE DISCRETION AND SUBJECT TO APPLICABLE LAW, TO PROVIDE CONFORMING SERVICES OR TO TERMINATE THE NON-CONFORMING SERVICES, PROVIDE A PRORATED REFUND OF ANY UNUSED PREPAID FEES FROM THE PERIOD OF NON-CONFORMANCE, AND PROVIDE RELIEF FROM ANY SUBSEQUENT PAYMENTS DUE WITH RESPECT TO SUCH NON-CONFORMING SERVICES. POWER DESIGNER PRO SHALL PROVIDE CONSULTING SERVICES, IF PURCHASED, IN A PROFESSIONAL AND WORKMANLIKE MANNER. POWER DESIGNER PRO’S ENTIRE LIABILITY AND CUSTOMER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY REGARDING CONSULTING SERVICES IS RE-PERFORMANCE OF THE CONSULTING SERVICES OR, IF RE-PERFORMANCE IS NOT POSSIBLE OR CONFORMING, THEN POWER DESIGNER PRO SHALL REFUND THE AMOUNT PAID FOR THE NON-CONFORMING CONSULTING SERVICES.
6.2. THE FOREGOING LIMITED WARRANTY DOES NOT COVER PROBLEMS ARISING BY ACCIDENT, ABUSE OR USE IN A MANNER INCONSISTENT WITH THIS AGREEMENT OR RESULTING FROM EVENTS BEYOND POWER DESIGNER PRO’S REASONABLE CONTROL, INCLUDING, WITHOUT LIMITATION, UNAVAILABILITY OF THE SERVICES OR USE OF THE SERVICES IN COMBINATION WITH A THIRD-PARTY NETWORK OR SYSTEM, HARDWARE, SOFTWARE, SERVICE OR DATA. TO THE EXTENT PERMITTED BY APPLICABLE LAW, POWER DESIGNER PRO AND ITS AFFILIATES, LICENSORS AND SERVICE PROVIDERS DISCLAIM ALL OTHER REPRESENTATIONS, WARRANTIES AND CONDITIONS, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, TITLE, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT, AND ANY WARRANTIES ARISING OUT OF ANY COURSE OF DEALING OR USAGE OF TRADE, AND ANY CONDITIONS OF QUALITY, AVAILABILITY, RELIABILITY, SECURITY, OR LACK OF VIRUSES, BUGS OR ERRORS. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF CERTAIN WARRANTIES AND CONDITIONS, THEREFORE SOME OF THE ABOVE EXCLUSIONS IN THIS SECTION 6.2 MAY NOT APPLY IF CUSTOMER IS LOCATED IN SUCH A JURISDICTION.
POWER DESIGNER PRO DOES NOT MAKE ANY WARRANTY AS TO POWER DESIGNER PRO AI OUTPUT OR THE RESULTS THAT MAY BE OBTAINED FROM THE USE OF POWER DESIGNER PRO AI OR THE ACCURACY OF ANY OTHER INFORMATION OBTAINED THROUGH POWER DESIGNER PRO AI. CUSTOMER UNDERSTANDS AND AGREES THAT POWER DESIGNER PRO DOES NOT ATTEMPT TO VERIFY THE ACCURACY OR COMPLIANCE WITH LAWS OF ANY POWER DESIGNER PRO AI OUTPUT, MATERIAL, AND/OR OTHER DATA OBTAINED THROUGH THE USE OF ANY POWER DESIGNER PRO AI FEATURE, AND CUSTOMER ASSUMES THE SOLE RISK FOR USE OF SUCH POWER DESIGNER PRO AI OUTPUT, MATERIAL, AND/OR DATA. CUSTOMER SHOULD NOT RELY ON ANY FACTUAL ASSERTION IN POWER DESIGNER PRO AI OUTPUT WITHOUT INDEPENDENTLY FACT CHECKING ITS ACCURACY. POWER DESIGNER PRO AI OUTPUT THAT APPEAR(S) ACCURATE BECAUSE OF ITS DETAIL OR SPECIFICITY MAY STILL CONTAIN MATERIAL INACCURACIES. POWER DESIGNER PRO AI MAY NOT BE CAPABLE OF DYNAMICALLY RETRIEVING INFORMATION, AND POWER DESIGNER PRO AI OUTPUT MAY NOT ACCOUNT FOR EVENTS OR CHANGES TO UNDERLYING FACTS OCCURRING AFTER POWER DESIGNER PRO AI WAS TRAINED. NO INFORMATION OR ADVICE, WHETHER ORAL OR WRITTEN, OBTAINED BY CUSTOMER FROM POWER DESIGNER PRO OR THROUGH POWER DESIGNER PRO AI SHALL CREATE ANY WARRANTY NOT EXPRESSLY MADE HEREIN.
6.3. Customer represents and warrants that it is entitled to transfer the Customer Data to POWER DESIGNER PRO so that POWER DESIGNER PRO and its sub-processors and Affiliates may lawfully use, process, and transfer the Customer Data in accordance with this Agreement on Customer’s behalf.
6.4. Indemnification by Customer. CUSTOMER AGREES TO INDEMNIFY, DEFEND, AND HOLD POWER DESIGNER PRO, ITS AFFILIATES, AND ITS RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, MEMBERS, INVESTORS, CONTRACTORS, OR REPRESENTATIVES HARMLESS FROM AND AGAINST ANY CLAIM OR DEMAND, INCLUDING, WITHOUT LIMITATION, REASONABLE ATTORNEYS’ FEES, MADE IN CONNECTION WITH OR ARISING OUT OF CUSTOMER’S OR ITS USERS’ USE OF THE SERVICES, CONNECTION TO THE SERVICES, VIOLATION OF THE TERMS, VIOLATION OF AN APPLICABLE LAW, SUBMISSION, POSTING, OR TRANSMISSION OF CUSTOMER CONTENT TO THE SERVICES, AND/OR VIOLATION OF ANY RIGHTS OF ANOTHER INDIVIDUAL OR ENTITY. POWER DESIGNER PRO RESERVES THE RIGHT TO ASSUME THE EXCLUSIVE DEFENSE AND CONTROL OF SUCH DISPUTES, AND, IN ANY EVENT, CUSTOMER WILL COOPERATE WITH POWER DESIGNER PRO IN ASSERTING ANY AVAILABLE DEFENSES.
The user agrees to indemnify, defend, and hold harmless Power Designer Pro, its affiliates, officers, directors, employees, contractors, licensors, and service providers from and against any claims, liabilities, damages, judgments, awards, losses, costs, expenses, or fees (including reasonable attorneys' fees) arising out of or relating to the user's use of the Services, including but not limited to: (a) reliance on any calculations, data, or information provided by the Services; (b) the user's violation of these Terms of Service; (c) the user's violation of any rights of another party; or (d) the user's violation of any applicable laws, rules, or regulations. Power Designer Pro reserves the right, at its own cost, to assume the exclusive defense and control of any matter otherwise subject to indemnification by the user, in which event the user will fully cooperate with Power Designer Pro in asserting any available defenses."
TO THE EXTENT PERMITTED BY APPLICABLE LAW, EXCEPT FOR CUSTOMER’S INDEMNIFICATION OBLIGATIONS AND A BREACH BY CUSTOMER OF SECTION 2, NEITHER PARTY SHALL BE LIABLE TO THE OTHER PARTY OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL LOSSES, OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, THOSE ARISING OUT OF OR RELATING TO: (i) LOSS OF DATA; (ii) LOSS OF INCOME; (iii) LOSS OF OPPORTUNITY; (iv) LOST PROFITS; AND (v) UNAVAILABILITY OR NON-PERFORMANCE OF ANY OR ALL OF THE SERVICES, IN EACH CASE, HOWEVER CAUSED AND BASED ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), OR VIOLATION OF STATUTE, WHETHER OR NOT SUCH PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SOME OF THE ABOVE LIMITATIONS IN THIS SECTION 7 MAY NOT APPLY IF CUSTOMER IS LOCATED IN SUCH A JURISDICTION.
TO THE EXTENT PERMITTED BY LAW, EXCEPT FOR CUSTOMER’S INDEMNIFICATION OBLIGATIONS AND A BREACH BY CUSTOMER OF SECTION 2, THE TOTAL CUMULATIVE LIABILITY OF EITHER PARTY AND THEIR RESPECTIVE AFFILIATES, LICENSORS AND SERVICE PROVIDERS ARISING OUT OF THIS AGREEMENT AND/OR THE TERMINATION THEREOF SHALL BE LIMITED TO THE SUM OF THE AMOUNTS ACTUALLY PAID FOR THE APPLICABLE SERVICES DURING THE TWELVE (12) MONTHS IMMEDIATELY PRECEDING THE INCIDENT GIVING RISE TO THE LIABILITY, OR, IN THE CASE OF POWER DESIGNER PRO CONSULTING SERVICES, THE AMOUNTS ACTUALLY PAID FOR THE APPLICABLE CONSULTING SERVICES. THE FOREGOING SHALL NOT LIMIT CUSTOMER’S OBLIGATIONS TO PAY ANY FEES AND/OR OTHER SUMS DUE TO POWER DESIGNER PRO. THE SERVICES DESCRIPTIONS MAY CONTAIN ADDITIONAL LIMITATIONS OF LIABILITY RELATED TO INDIVIDUAL SERVICES.
The Services provided by Power Designer Pro, including all related algorithms and calculations ('Services'), are intended to serve as a supplementary tool for professional engineering calculations. They are not intended to serve as a substitute for professional judgment or independent verification. The user acknowledges and agrees that they are responsible for conducting their own independent verification of any calculations produced by the Services before relying on such calculations for any professional, construction, or design decisions. Power Designer Pro does not guarantee that the Services will address all possible scenarios or variables inherent in engineering calculations. Users are advised to consult with a qualified engineering professional to confirm the appropriateness of using the Services in their specific context.
8.1. U.S. Government End-Users. If Customer is a U.S. Government agency, Customer hereby acknowledges and agrees that the software being accessed through Services, as well as any software that is downloaded by any User in connection with the Services, constitutes “Commercial Computer Software” as defined in Section 2.101 of the Federal Acquisition Regulation (“FAR”), 48 CFR 2.101. Therefore, in accordance with Section 12.212 of the FAR (48 CFR 12.212), and Sections 227.7202-1 and 227.7202-3 of the Defense Federal Acquisition Regulation Supplement (“DFARS”) (48 CFR 227.7202-1 and 227.7202-3), the use, duplication, and disclosure of the software and related Documentation by the U.S. Government or any of its agencies is governed by, and is subject to, all of the terms, conditions, restrictions and limitations set forth in this Agreement. If, for any reason, FAR 12.212 or DFARS 227.7202-1 or 227.7202-3 or these license terms are deemed not applicable, Customer hereby acknowledges that the Government’s right to use, duplicate or disclose the software and related Documentation are “Restricted Rights” as defined in 48 CFR Section 52.227-14(a) (May 2014) or DFARS 252.227-7014(a)(15) (Feb 2014), as applicable. Manufacturer is Bremen Engineering Inc.
8.2. Free Trials and Free Customer Accounts. NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THIS AGREEMENT, POWER DESIGNER PRO PROVIDES FREE TRIALS AND FREE CUSTOMER ACCOUNTS “AS IS” AND WITHOUT WARRANTY.
8.3. “Beta,” “Tech Preview,” or Labs Services. The Services do not include “Beta,” “Tech Preview” or Labs Services. Customer acknowledges that, notwithstanding anything to the contrary in this Agreement, ANY “Beta,” “Tech Preview” or Labs Services are offered “AS-IS” FOR INTERNAL DEMONSTRATION, TEST OR EVALUATION PURPOSES ONLY AND WITHOUT WARRANTY. Such services may contain bugs, errors, and other defects. POWER DESIGNER PRO does not make any representations, promises, or guarantees that such services will be publicly announced or made generally available. POWER DESIGNER PRO has no obligation to provide technical support or continued availability, and such services may be suspended or terminated at any time by POWER DESIGNER PRO in its sole discretion with or without notice to Customer.
8.4. Third-Party Products, Services or Content. Services may contain features or functions that enable interoperation with third-party products, services, or content. POWER DESIGNER PRO may also provide access to third-party products, services, or content directly within the Services. Third-party products, services or content, and customer content in third-party services, are not part of the Services and are not warranted or supported by POWER DESIGNER PRO. Customer’s or its Users’ use of such third-party products, services or content is subject to the terms of the third-party provider. To the extent Customer or its Users authorize access or transmission of Customer Data through a third-party service, in no event will POWER DESIGNER PRO be responsible for any use, disclosure, modification or deletion of such Customer Data or for any act or omission on the part of such third-party provider or its services.
8.5. Copyright. POWER DESIGNER PRO reserves the right to delete or disable any Customer Data, including POWER DESIGNER PRO AI Output, allegedly infringing copyright(s); to require that Customer terminate the accounts of Users who are repeat copyright infringers; and to forward the information in any copyright-infringement notice to the User who allegedly provided the infringing content.
8.6. Aggregated Anonymous Data. POWER DESIGNER PRO may aggregate the metadata and usage data of Customer and/or its Users collected or otherwise made available through the Services so that the results are non-personally identifiable with respect to Customer and/or its Users (“Aggregated Anonymous Data”). The Aggregated Anonymous Data will be deemed POWER DESIGNER PRO’s proprietary technology, and Customer acknowledges that POWER DESIGNER PRO may perpetually use the Aggregated Anonymous Data (i) for its own internal, statistical analysis, (ii) to develop and improve the Services, and (iii) to create and distribute reports and other materials regarding use of the Services. For clarity, nothing in this Section 8.6 gives POWER DESIGNER PRO the right (or ability) to publicly identify Customer and/or its Users as the source of any Aggregated Anonymous Data.
8.7. Suspension of Services. POWER DESIGNER PRO reserves the right to suspend Customer’s access to all or any portion of the Services if it determines, in its sole discretion, that (i) payment for the Services is not received within fourteen (14) days from the date on which payment is due; (ii) Customer’s or its Users’ use of the Services are in breach of this Agreement; (iii) Customer fails to timely address POWER DESIGNER PRO’s request to take action pursuant to Section 2.4; (iv) Customer’s use of the Services poses a security or other risk to the Services or to other users of the Services; or (v) suspension is required pursuant to a subpoena, court order or other legal process. POWER DESIGNER PRO agrees to notify Customer of any such suspension. Customer will remain responsible for all Fees incurred before or during any suspension. POWER DESIGNER PRO reserves the right, in its sole discretion, to impose reasonable Fees to, upon Customer request, restore archived data from delinquent accounts.
8.8. Voice and Data Charges; Customer Connectivity. Customer is responsible for all fees and charges imposed by Customer’s telephone carriers, wireless providers, and other voice and/or data transmission providers arising out of access to and use of the Services. If Customer’s broadband connection and/or telephone service fails, or Customer experiences a power or other failure or interruption, the Services may also cease to function for reasons outside of POWER DESIGNER PRO’s control.
8.9 Improving POWER DESIGNER PRO AI. POWER DESIGNER PRO does not use Customer Data or permit others to use Customer Data to train the machine learning methods and data models used to provide POWER DESIGNER PRO AI features and functionality. Customer’s use of POWER DESIGNER PRO AI does not grant POWER DESIGNER PRO any right or license to use Customer Data in a manner that is inconsistent with this Agreement or to train POWER DESIGNER PRO’s machine learning methods or data models unless otherwise agreed to by Customer.
POWER DESIGNER PRO AI and its machine learning methods and data models may develop over time to better address specific use cases. POWER DESIGNER PRO may use data collected from Customer’s use of POWER DESIGNER PRO AI, including Customer Data, to improve POWER DESIGNER PRO’s models when Customer: (i) voluntarily provides Feedback to POWER DESIGNER PRO, such as by labeling POWER DESIGNER PRO AI Output with a “thumbs up” or “thumbs down;” or (ii) gives POWER DESIGNER PRO its permission.
8.10 POWER DESIGNER PRO AI Fair Usage. Additionally, Customer’s use of POWER DESIGNER PRO AI is subject to fair usage restrictions that POWER DESIGNER PRO may determine in its sole discretion. Customer acknowledges and agrees that if Customer exceeds what POWER DESIGNER PRO, in its sole discretion, determines to be fair usage, POWER DESIGNER PRO may disable or degrade the performance of POWER DESIGNER PRO AI.
8.11. Confidential Information. Customer agrees that POWER DESIGNER PRO Materials and POWER DESIGNER PRO technology are POWER DESIGNER PRO’s confidential information. Further, Customer agrees that it shall not disclose or use any of POWER DESIGNER PRO’s confidential information for any purpose outside the scope of this Agreement, except with POWER DESIGNER PRO’s prior written permission. Customer shall use POWER DESIGNER PRO’s confidential information, including the POWER DESIGNER PRO Materials and POWER DESIGNER PRO technology, only as expressly permitted in this Agreement.
8.12. Force Majeure. Notwithstanding anything to the contrary in this Agreement, neither Party will be responsible or have any liability for any delay or failure to perform its non-monetary obligations hereunder to the extent due to unforeseen circumstances or causes beyond its reasonable control, including but not limited to acts of God, earthquake, fire, flood, sanctions, embargoes, strikes, lockouts or other labor disturbances, civil unrest, failure, unavailability or delay of suppliers or licensors, riots, terrorist or other malicious or criminal acts, war, failure or interruption of the Internet or third-party internet connections or infrastructure, power failures, acts of civil and military authorities and severe weather (in each case, “Force Majeure”). The affected Party will give the other Party prompt written notice (when possible) of the failure to perform due to Force Majeure and use its reasonable efforts to limit the resulting delay in its performance.
8.13. Feedback. If Customer provides any comments, suggestions, possible improvements or other feedback to POWER DESIGNER PRO regarding the Services or consulting services related to this Agreement (“Feedback”), POWER DESIGNER PRO may use such Feedback for any purpose without any compensation or obligation to Customer provided such use does not violate POWER DESIGNER PRO’s confidentiality obligations under this Agreement. Customer grants POWER DESIGNER PRO an irrevocable, worldwide, royalty-free, transferable, sublicensable and perpetual license to use, modify, publish and distribute such Feedback, as well as to make, have made, distribute, sell, offer to sell, display perform and otherwise exploit products and services that use such Feedback for any purpose without restriction.
8.14. Relationship of the Parties. The Parties are independent contractors and nothing in this Agreement creates a partnership, franchise, joint venture, agency, fiduciary, or employment relationship between or among the Parties. POWER DESIGNER PRO may subcontract responsibilities under this Agreement but remains responsible for its breach of this Agreement by the acts or omissions of POWER DESIGNER PRO or its subcontractors. No person or entity not a Party to this Agreement will be deemed to be a third-party beneficiary of this Agreement or any provision hereof.
8.15. Eligibility and Scope. To use the Services, Customer represents and warrants that Customer is competent to enter into this Agreement and that Customer and its Users are each at least 18 years of age. If the laws where Customer or its Users reside require that Customer or its Users be older for POWER DESIGNER PRO to lawfully provide the Services to them and use their personal data without parental consent, then Customer or its Users must be that older age. If the representations and warranties above in this Section 8.16 are not true, or if POWER DESIGNER PRO has previously prohibited Customer or its Users from accessing or using the Services, Customer or such Users may not access or use the Services.
8.16. Assignment. Customer may not assign its rights or delegate its duties under this Agreement either in whole or in part without POWER DESIGNER PRO’s prior written consent, except that Customer may assign this Agreement in whole to one of Customer’s Affiliates, or to a successor in interest as part of a corporate reorganization, consolidation, merger, or sale of all or substantially all of its assets. Customer shall promptly provide notice to POWER DESIGNER PRO including documentation sufficient to evidence completion of any permitted assignment. Any attempted assignment in violation of the foregoing shall be void. This Agreement will bind and inure to the benefit of each Party and their respective successors and permitted assigns.
8.17. Export Restriction and Compliance with Laws. Customer acknowledges that the Services are subject to U.S., foreign, and international export controls and economic sanctions laws and regulations and agrees to comply with all such applicable laws and regulations, including, but not limited to, the U.S. Export Administration Regulations (“EAR”) and regulations promulgated by the U.S. Department of the Treasury’s Office of Foreign Assets Control (“OFAC”). Customer also specifically agrees not to, directly or indirectly, allow access to or use of the Services in embargoed or sanctioned countries/regions, by sanctioned or denied persons, or for prohibited end-uses under U.S. law without authorization from the U.S. government. Both Parties also agree to comply with all other laws, rules, and regulations applicable to that Party under this Agreement.
8.18. Audit. To the extent permitted by applicable law, Customer agrees to allow POWER DESIGNER PRO to audit Customer’s compliance with this Agreement.
8.19. Notices. All legal notices required under this Agreement shall be in writing and delivered in person or by certified or registered express mail to the address last designated on the Customer Account or such other address as either Party may specify by notice to the other Party as provided herein. Notice shall be deemed given (i) upon personal delivery; (ii) if delivered by air courier or email, upon confirmation of receipt; or (iii) five (5) days after deposit in the mail. A copy of all legal notices from Customer to POWER DESIGNER PRO must also be sent to the email address info@powerdesignerpro.com. POWER DESIGNER PRO may provide Customer with general notices through in-product messaging or dashboards, which shall likewise be deemed effective immediately.
8.20. Entire Agreement; Order of Precedence. The Agreement sets forth the entire agreement and understanding of the Parties relating to the Services and Customer Data and supersedes all prior and contemporaneous oral and written agreements. For any conflict between these terms and any supplementary BAA terms related to PHI, this Agreement shall control. Nothing contained in any other document submitted by Customer shall in any way add to or otherwise modify the Agreement or any POWER DESIGNER PRO license program terms under which an Order is submitted. Notwithstanding the foregoing, in the event of a conflict between this Agreement and an order form prepared solely by POWER DESIGNER PRO, referencing this Agreement as governing terms, and signed by the Parties (an “Order Form”), such Order Form shall control. The terms of this Agreement may be updated by POWER DESIGNER PRO from time to time without notice (but will be identified by the last updated date) and may be reviewed at https://www.powerdesignerpro.com/terms/. Customer’s continued access to and use of the Services constitutes acceptance of the then-current terms.
8.21. Miscellaneous Terms. Captions and headings are used herein for convenience only, are not a part of this Agreement, and shall not be used in interpreting or construing this Agreement. Any provision of this Agreement that by its nature is reasonably intended to survive beyond its termination or expiration shall survive. Notwithstanding the foregoing, Sections 1 (Definitions), 2.2 (Limitations on Use), 2.3 (Inappropriate Content), 2.4 (Violations of Limitations on Use), 2.5 (Proprietary Rights), 3 (Free Trials, Orders, Fees, Payment, and Free Customer Accounts), 5 (Customer Data and Account), 6.4 (Indemnification by Customer), 7 (Limitation of Liability), 8.5 (Copyright), 8.6 (Aggregated Anonymous Data), 8.8 (Suspension of Services), 8.10 (Confidential Information), 8.20 (Notices), 8.22 (Miscellaneous Terms), and 8.23 (Choice of Law and Disputes) shall survive any termination of the Agreement. If any provision of this Agreement is declared by a court of competent jurisdiction to be invalid, illegal, or unenforceable, such provision shall be modified by the court and interpreted to best accomplish the objectives of the original provision to the fullest extent permitted by law, and the other provisions of this Agreement shall remain in full force and effect. POWER DESIGNER PRO’s resellers and distributors do not have the right to make modifications to this Agreement or to make any additional representations, commitments, or warranties binding on POWER DESIGNER PRO, its Affiliates, or its subcontractors. No waiver or amendment of any term or condition of this Agreement shall be valid or binding on any Party unless agreed to in writing by such Party. POWER DESIGNER PRO’s failure to enforce any term of this Agreement will not be construed as a waiver of the right to enforce any such terms in the future. Unless otherwise specified, remedies are cumulative. This Agreement is agreed to through purchase (including automatic renewals) and/or use of the Services.
8.22. Choice of Law and Disputes. This Agreement and any disputes arising out of or related hereto shall be governed by and construed in accordance with the laws of the province of Saskatchewan, Canada, without giving effect to its conflicts of laws rules, the United Nations Convention on the International Sale of Goods, or the Uniform Computer Information Transactions Act. Customer consents to the exclusive jurisdiction of Saskatchewan, Canada. Notwithstanding the foregoing, Customer agrees before taking any formal action that Customer will contact POWER DESIGNER PRO at the email address info@powerdesignerpro.com and provide a brief, written description of the dispute and Customer’s contact information (including Customer’s username, if Customer’s dispute relates to an account). Except for intellectual property and small claims court claims, the Parties agree to use their best efforts to settle any dispute, claim, question, or disagreement directly through consultation with POWER DESIGNER PRO, and good faith negotiations shall be a condition to Customer initiating legal action.